铁路职工健康维护工作初探

从健康意识逐渐提高、健康知识不断增加、健康生活方式逐步建立及健康状况有所改善等方面阐述铁路实施健康行动计划后取得的成效,分析健康维护中存在的主要问题,即专业人员不足、服务方式较单一及高血压控制率有待提高,进而提出加强专业队伍建设、引进研发新设备、强化铁路健康教育及深化“四高”联防联控等进一步开展健康维护工作的建议。     

工业水处理中节能优化控制的研究

工业水的处理一直以来都是环境工程当中十分重要的一个环节,而要做好这一环节就需要针对其中存在的问题进行科学合理的优化控制过程,本文从这一点出发,提出工业水处理过程中相关的工作内容。     

Electrocatalytic oxidation of PCP-Na by a novel nano-PbO2 anode: degradation mechanism and toxicity assessment

Environmental Science and Pollution Research - This study aims at investigating the electrocatalytic oxidation of sodium pentachlorophenate (PCP-Na) using a novel nano-PbO2 powder anode. The...     

A fractal derivative model to quantify bed-load transport along a heterogeneous sand bed

Environmental Fluid Mechanics - Bed-load transport is a complex process exhibiting anomalous dynamics, which cannot be efficiently described using the traditional advection–diffusion...     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

Metabolic uncoupler, 3,3′,4′,5-tetrachlorosalicylanilide addition for sludge reduction and fouling control in a gravity-driven membrane bioreactor

• Effects of metabolic uncoupler TCS on the performances of GDMBR were evaluated. • Sludge EPS reduced and transformed into dissolved SMP when TCS was added. • Appropriate TCS increased the permeability and reduced cake layer fouling. • High dosage aggravated fouling due to compact cake layer with low bio-activity. The gravity-driven membrane bioreactor (MBR)system is promising for decentralized sewage treatment because of its low energy consumption and maintenance requirements. However, the growing sludge not only increases membrane fouling, but also augments operational complexities (sludge discharge). We added the metabolic uncoupler 3,3′,4′,5-tetrachlorosalicylanilide (TCS) to the system to deal with the mentioned issues. Based on the results, TCS addition effectively decreased sludge ATP and sludge yield (reduced by 50%). Extracellular polymeric substances (EPS; proteins and polysaccharides) decreased with the addition of TCS and were transformed into dissolved soluble microbial products (SMPs) in the bulk solution, leading to the break of sludge flocs into small fragments. Permeability was increased by more than two times, reaching 60–70 L/m²/h bar when 10–30 mg/L TCS were added, because of the reduced suspended sludge and the formation of a thin cake layer with low EPS levels. Resistance analyses confirmed that appropriate dosages of TCS primarily decreased the cake layer and hydraulically reversible resistances. Permeability decreased at high dosage (50 mg/L) due to the release of excess sludge fragments and SMP into the supernatant, with a thin but more compact fouling layer with low bioactivity developing on the membrane surface, causing higher cake layer and pore blocking resistances. Our study provides a fundamental understanding of how a metabolic uncoupler affects the sludge and bio-fouling layers at different dosages, with practical relevance for in situ sludge reduction and membrane fouling alleviation in MBR systems.     

Integrated factor analysis of water level variation in geographically isolated ponds

Environmental Science and Pollution Research - Small geographically isolated ponds provide a multitude of ecological functions and services, but water table fluctuations alter the magnitude of...     

河南省在用柴油车加载减速烟度排放限值研究

随着车辆技术进步和燃油品质提升,河南省在用柴油车加载减速污染物现行排放限值已不能对高排放车辆进行有效监控。依据《确定压燃式发动机在用汽车加载减速法排气烟度排放限值的原则和方法》(HJ/T 241—2005),采用相对光吸收系数与累积频率法,对9 458份在用柴油车检测数据进行统计分析,提出符合河南省的在用柴油车排放限值。建议河南省在用国三、国四、国五轻型柴油车尾气光吸收系数限值分别为0.98、0.89、0.76m~(-1),而相应重型柴油车尾气光吸收系数限值分别为0.66、0.62、0.48m~(-1);依据该限值,河南省在用柴油车的年检合格率控制在82.6%,高排放柴油车比例为17.4%,符合HJ/T 241—2005的要求。     

浅谈如何开展环境监测类设施公众开放日活动

随着城市工业化的快速发展,突发性环境污染事故逐渐增多,因此,环境公众开放日活动显得尤为重要。本文结合实际情况,探讨如何开展监测类公众开放日活动。     

一起塔式起重机冲顶事故的技术分析

某桥梁施工企业在对桥面施工时,塔式起重机空载起升发生冲顶事故,起升钢丝绳断裂,造成吊钩装置坠落砸死1人伤害事故.本文介绍了事故情况、事故勘查要点和模拟试验及相关计算方法,分析事故技术原因,提出预防事故的建议.